Your garage door is practically the largest moving part in your entire house, and is used numerous times a day at any hour and during all seasons. Doorboy, a garage  door service Short Hills, NJ, can help you to keep your garage door operating smoothly for decades to come.

However, it’s very important that you take time to conduct routine preventive care and maintenance practices, some of which include:

Tightening Up the Hardware

A standard garage door moves up and down more than a thousand times each year. This is quite a lot of vibration that usually causes the hardware to loosen. As a result, it’s essential that you inspect and tighten all bolts and roller brackets with a socket wrench.

Testing the Balance

If your garage door is not well balanced, the garage door opener will be forced to work harder and won’t last as long.

You can conduct a simple test by disconnecting the opener using the pulling handle release, which is usually a red cord, then manually move the door halfway up. If it fails to stay put, you will know that the counterweight springs aren’t properly balanced.

However, in case of anything goes wrong, it’s advisable that any garage door spring adjustments be done by a professional.

Examining and Replacing the Rollers

Be they nylon or steel, garage door rollers need to be inspected at least twice a year and replaced after seven years or so. You may have to do it sooner if you use your garage door too many times in a day.

Cracked, worn, or chipped rollers should be replaced as soon as possible by removing and reinstalling any rollers brackets that aren’t directly attached to the cable system.

Lubrication

Ensuring your garage door is properly greased up will help to add years of flawless operation to your system. The good thing is that it just takes a few minutes. You can use lithium grease on the door’s opener’s screw or chain, and spray a lubricant from you garage door specialist for coating the overhead springs.

Checking the Cables

You should never play around with the high-tension cables that are responsible for lifting your garage door because they have enough force to kill or maim.

You can check for damage close to the roller bracket or broken strands before having a professional to come take a closer look. This is the best and wisest move. Don’t trying handling the cables on your own.

Follow these few tips and your garage door will work like clockwork for a very long time.